Sectioner

From STX Wiki
Jump to navigation Jump to search

The Sectioner windows are always displayed above all other graphs in the Spectrogram & Parameters Viewer. They contain the waveform zoom and the spectrum of the signal around the active time scale cursor. The Sectioner implements a number of different analysis methods, which can be configured in the Settings Dialog, reached from the Sectioner context menu or the Sectioner menu.

V2 sectioner windows.png

Sectioner settings may be global to STx or saved per profile.

Automatic Plotting

By default, the Sectioner is plotted for the signal at the active cursor position in the active method graph. You can turn of automatic plotting in the Sectioner menu. If automatic plotting is turned off, you can explicitly plot a spectrum of the signal at the current cursor position by pressing the hotkey associated with the sectionerPlot command.

Calibration Data

You can use the spectrum in the Sectioner to set the calibration data for the current sound file using the context menu entry 'Set Calibration Data'.

Hiding and showing the Sectioner windows

You can hide or show the Sectioner windows using the hotkey Ctrl+W or the Hide/Show command in the Sectioner menu. There are also three different layouts for the Sectioner windows, which you can toggle through using the hotkey Ctrl+N.

Settings

The sectioner settings are available in the Sectioner Settings Dialog.